- Created: 09-11-20
- Last Login: 09-11-20
User Profile
jiao7593v
The hydraulic separator is a device which makes the primary and secondary circuits connected to it independent, and can be used on hot or chilled water systems. The separator is supplied with an air-vent and check valve assembly to permit automatic discharge of the air in the circuits, and a drain valve for removing any impurities deposited in the bottom of the unit. These items are designed for use in closed hydronic systems. Do not use in plumbing applications.
Product range
Series 548 Sizes: 1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?NPT female union connections
1鈥? 1 1/4鈥? 1 1/2", 2" sweat union connections
1鈥? 1 1/4鈥? 1 1/2", 2" press union connections
2鈥? 4鈥?flanged connections ANSI 150 CLASS
Technical specifications of hydronic
separator: 1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?NPT Female union
1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?sweat union
1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?press union
Drain valve: 3/4鈥?NPT Male
Materials: - Separator body: epoxy resin painted steel
- Unions: Brass
- Air vent body: Brass
- Air vent hydraulic seal: peroxide-cured EPDM
- Air vent float: PP
- Shut-off and drain valve body: Brass
Medium: Water and non-hazardous glycol solutions up to 50%
Max operating pressure: 150 psi (10 bar)
Temperature range: 32 - 250掳F (0梅120掳C)
Temperature gauge front connection: 1/2鈥?/p>
Flanged Connections
Separator: 2鈥?-4鈥?ANSI 150 CLASS
2鈥?14鈥?ANSI 150 CLASS(ASME)
Air vent relief: 3/8鈥?Female
Drain valve: 1 1/4鈥?NPT Female
Material: -Separator body: epoxy resin painted steel
-Air vent body: Brass
-Shut-off and drain valve body: Brass
-Air vent seal: VITON
-Air vent float: stainless steel
Medium: Water and non-hazardous glycol solutions up to 50%
Max operating pressure: 150 psi(bar)
Temperature range: 32-250鈩?0 - 120)鈩?/p>
Technical specifications of insulation on union models
Inner part
Material: closed-cell expanded PE-X
Thickness: 13/16鈥?20mm)
Density: inner part; 1.9 lb/ft3(30 kg/m3)
outer part; 3.1 lb/ft3(50 kg/m3)
Conductivity(ISO 2581): -at 32鈩?0鈩?; .16 BTU/in (0.038 W/m.K)
-at 105鈩?400鈩?; .26 BTU/in (0.045 W/m.K)
Water vapour resistance coefficient(DIN 52615): 锛?.300
Temperature range: 0 - 210鈩?0 - 100鈩?
Fire resistance(DIN 4102): Class B2
Technical specifications of insulation on flanged models (only for 2鈥?to 4鈥?sizes)
Inner part
Material: rigid closed cell expanded polyurethane foam
Thickness: 2 3/8鈥?60 mm)
Density: 3 lb/ft3 (45 kg/m3)
Conductivity(ISO 2581): 0.16 BTU/in (0.023 W/m.K)
Temperature range: 32 - 220鈩?(0 - 105鈩?
Outer part
Material: Embossed aluminum
Thickness: 7-mil (0.70 mm)
Fire resistance(DIN 4102): Class 1
Head covers
Heat formed material: PS
Hydraulic characteristics
The hydraulic separator should be sized according to the maximum flow rate value foreseen at the inlet. The selected value must be either that of the primary circuit or of the secondary, whichever is the greatest.Plumbing Fittings suppliers
website:http://www.abheatexchanger.com/plumbing-fittings/
Product range
Series 548 Sizes: 1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?NPT female union connections
1鈥? 1 1/4鈥? 1 1/2", 2" sweat union connections
1鈥? 1 1/4鈥? 1 1/2", 2" press union connections
2鈥? 4鈥?flanged connections ANSI 150 CLASS
Technical specifications of hydronic
separator: 1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?NPT Female union
1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?sweat union
1鈥? 1 1/4鈥? 1 1/2鈥? 2鈥?press union
Drain valve: 3/4鈥?NPT Male
Materials: - Separator body: epoxy resin painted steel
- Unions: Brass
- Air vent body: Brass
- Air vent hydraulic seal: peroxide-cured EPDM
- Air vent float: PP
- Shut-off and drain valve body: Brass
Medium: Water and non-hazardous glycol solutions up to 50%
Max operating pressure: 150 psi (10 bar)
Temperature range: 32 - 250掳F (0梅120掳C)
Temperature gauge front connection: 1/2鈥?/p>
Flanged Connections
Separator: 2鈥?-4鈥?ANSI 150 CLASS
2鈥?14鈥?ANSI 150 CLASS(ASME)
Air vent relief: 3/8鈥?Female
Drain valve: 1 1/4鈥?NPT Female
Material: -Separator body: epoxy resin painted steel
-Air vent body: Brass
-Shut-off and drain valve body: Brass
-Air vent seal: VITON
-Air vent float: stainless steel
Medium: Water and non-hazardous glycol solutions up to 50%
Max operating pressure: 150 psi(bar)
Temperature range: 32-250鈩?0 - 120)鈩?/p>
Technical specifications of insulation on union models
Inner part
Material: closed-cell expanded PE-X
Thickness: 13/16鈥?20mm)
Density: inner part; 1.9 lb/ft3(30 kg/m3)
outer part; 3.1 lb/ft3(50 kg/m3)
Conductivity(ISO 2581): -at 32鈩?0鈩?; .16 BTU/in (0.038 W/m.K)
-at 105鈩?400鈩?; .26 BTU/in (0.045 W/m.K)
Water vapour resistance coefficient(DIN 52615): 锛?.300
Temperature range: 0 - 210鈩?0 - 100鈩?
Fire resistance(DIN 4102): Class B2
Technical specifications of insulation on flanged models (only for 2鈥?to 4鈥?sizes)
Inner part
Material: rigid closed cell expanded polyurethane foam
Thickness: 2 3/8鈥?60 mm)
Density: 3 lb/ft3 (45 kg/m3)
Conductivity(ISO 2581): 0.16 BTU/in (0.023 W/m.K)
Temperature range: 32 - 220鈩?(0 - 105鈩?
Outer part
Material: Embossed aluminum
Thickness: 7-mil (0.70 mm)
Fire resistance(DIN 4102): Class 1
Head covers
Heat formed material: PS
Hydraulic characteristics
The hydraulic separator should be sized according to the maximum flow rate value foreseen at the inlet. The selected value must be either that of the primary circuit or of the secondary, whichever is the greatest.Plumbing Fittings suppliers
website:http://www.abheatexchanger.com/plumbing-fittings/